The case is really stylish and well designed, even though there are some minor aspects (such as quality of some of the internal plasitics or the Logo while it is used in vertical mode) that could be better, but can easily be overlooked. The main factor for me is the capability of putting inside a full fledged video card (in my case a GTX 1070) within a compact but well designed space. It allow only mini-ITX components (SFX Power Supply and M-ITX Mother Board), 2 x 2,5" units and a very reduced list of cooling alternatives (basically 2 extra 10mm wide fans for the GPU and a CPU solution (fan + heatsink) of up to 58mm, but all things considered, I am quite happy with the end result.
Verified purchase: Yes | Condition: New
Great product. As described. I have custom fit a cpu water cooling unit into this case with a full size 1080 GTX. I cut side of case and mounted to exhaust air.
Verified purchase: Yes | Condition: New
I like the aesthetics of this case and it fits a full-sized graphics card. In the upright position, the plastic stand blocks alot of the exhaust vent holes for the graphics card bay - heat does make it's way into the CPU side of the case. I added a Noctua 40mm x 10mm fan to exhaust hot air from the CPU bay and replaced my CPU cooler to a Scythe Shuriken 2 and am getting CPU temps around 70C while gaming. This dropped the temps around 5-10C. Not too bad, but still a little toasty. Overclocking is not recommended for this case. The mesh filter in the graphics card side is very close to the fans if you mount any there. I mounted 2 to pull air into the case, and it pulls and rubs the screen and makes noise. I ended up removing this filter. Cable management is a challenge, but not too bad. All in all, it made a pretty nice, svelte gaming case. Components I used are a Asus ROG H470-I motherboard, Corsair 450 SFX PS, Intel i7-10700 CPU, Scythe Shuriken 2 CPU cooler, 32 GB Gskill Aegis RAM, 2 TB Inland M2 SSD, EVGA RTX2060 graphics card, 2-120mm by 15mm Silverstone ARGB and 1-40mm x 10mm Noctua case fans.Read full review
Verified purchase: Yes | Condition: New
Pros: This compact case is easier to build in than some others that I've tried. It has vents in the right spots for CPU/GPU/PSU. It feels well made and sturdy. Dual chambers for GPU and Systemboard. Cons: Removing the bottom half of the outer plastic shell can be difficult with the plastic tabs. It would be nice if the top vent had a magnetic dust filter. I would have liked it if it had some sort of HDD activity indicator, I may mod one into it.
Verified purchase: Yes | Condition: New
Awesome for a small mini-itx gaming system. I’d recommend having an intake fan under your GFX card in the front and an outblowing fan also under the GFX blowing out the bottom. The system can overclock with my gtx1080 and never go above 65 Celsius
Verified purchase: Yes | Condition: Pre-owned
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Best Selling in Computer Cases
Current slide {CURRENT_SLIDE} of {TOTAL_SLIDES}- Save on Computer Cases